Corrosion Risk Analysis in Submarine Pipelines and Their Protection Efforts
Keywords:
Corrosion, Underwater Pipelines, Marine Environment, Material Protection, Protective CoatingAbstract
Underwater pipes are one of the important parts of infrastructure development in marine areas. Pipes can be used to distribute oil, gas, and other necessities from one location to another. However, the use of pipes in the marine environment has a risk of damage, one of which is corrosion. Seawater containing salt and constantly changing environmental conditions can accelerate corrosion of pipe materials. If not handled properly, corrosion can cause thinning of the pipe walls, leaks, and even disrupt the distribution process. Therefore, efforts are needed to reduce these risks through the selection of suitable materials, the use of protective coatings, periodic inspections, and monitoring of pipeline conditions. This article discusses the causes and risks of corrosion in underwater pipes as well as some efforts that can be made to maintain the condition and service life of pipes.
References
[1] S.-C. Shen, Y.-C. Huang, C.-C. Chao, L. Lin, and Z. Tu, “Design and Fabrication of Posture Sensing and Damage Evaluating System for Underwater Pipelines,” Sensors (Basel)., vol. 25, 2025, doi: 10.3390/s25185927.
[2] E. López-Baltazar, ·. González‑Parra, ·. Barba, M. Ángel, and H. Gallegos, “Effects of hydrostatic pressure and temperature on the corrosion behavior of X52 pipeline steel in a simulated deep-sea environment,” Discov. Electrochem., vol. 2, 2025, doi: 10.1007/s44373-025-00025-x.
[3] B. Shah and A. Muthalif, “A comprehensive review on corrosion management in oil and gas pipeline: methods and technologies for corrosion prevention, inspection and monitoring,” Anti-Corrosion Methods Mater., 2025, doi: 10.1108/acmm-09-2024-3085.
[4] A. Anna and V. Romanovski, “Corrosion and Degradation of Materials in Marine Environments: Implications for Coastal and Offshore Infrastructure,” Eng. Reports, vol. 8, 2026, doi: 10.1002/eng2.70922.
[5] G. Li, W. He, P.-Y. Zhang, H. Wang, and Z. Wei, “Investigation on Corrosion-Induced Wall-Thinning Mechanisms in High-Pressure Steam Pipelines Based on Gas–Liquid Two-Phase Flow Characteristics,” Processes, 2025, doi: 10.3390/pr13072096.
[6] F. Jiang and E. Zhao, “A study on the failure mechanism of offshore pipelines with corrosion defects subjected to impact loads from falling objects,” Ocean Eng., 2025, doi: 10.1016/j.oceaneng.2024.120119.
[7] X. Guo et al., “Predicting impact forces on pipelines from deep-sea fluidized slides: A comprehensive review of key factors,” Int. J. Min. Sci. Technol., 2024, doi: 10.1016/j.ijmst.2024.02.001.
[8] A. Reda, M. Shahin, and P. Montague, “Review of Material Selection for Corrosion-Resistant Alloy Pipelines,” Eng. Sci., 2025, doi: 10.30919/es1373.
[9] P. Refait and S. Paul, “New frontiers in marine corrosion research,” npj Mater. Degrad., vol. 9, 2025, doi: 10.1038/s41529-025-00566-x.
[10] P. Yudin and A. Lozhkomoev, “Mechanisms of failure in anti-corrosion polymer coatings on metallic surfaces of oilfield pipelines: Review,” Powder Metall. and Funct. Coatings (Izvestiya Vuzov. Poroshkova Metall. i Funktsional'nye Pokrytiya), 2026, doi: 10.17073/1997-308x-2025-6-65-82.
[11] M. Kowalczyk, J. Andruszko, P. Stefanek, and R. Mazur, “Failure and Degradation Mechanisms of Steel Pipelines: Analysis and Development of Effective Preventive Strategies,” Materials (Basel)., vol. 18, 2024, doi: 10.3390/ma18010134.
[12] T. Zayed, “A Comprehensive Review of Corrosion Protection and Control Techniques for Metallic Pipelines,” Eng. Fail. Anal., 2022, doi: 10.1016/j.engfailanal.2022.106885.
[13] X. Li, Y. Liu, Z. Han, and G. Chen, “A risk-based maintenance decision model for subsea pipeline considering pitting corrosion growth,” Process Saf. Environ. Prot., 2024, doi: 10.1016/j.psep.2024.02.072.
